Hobart CE6HD ML-138010 Instrukcja Użytkownika

701 S. RIDGE AVENUETROY, OHIO 45374-0001937 332-3000www.hobartcorp.comFORM 35474 (July 2007)ELECTRIC COMBI,CONVECTION & STEAM OVENSBOILERLESS(LEFT

– 10 –SETTING THE TEMPERATURE 1. Select the cooking mode by pressing the Convection, Steam or Convection and Steam (Combi) Button(s). 2. Press the S

– 11 –SETTING THE HUMIDITY 1. Select Combi Mode by pressing the Convection Button and Steam Button. 2. Press the Selection Line Button next to the

– 12 –SETTING THE FAN SPEED 1. Select the cooking mode by pressing the Convection, Steam or Convection and Steam (Combi) Button(s). 2. Press the Sel

– 13 –SELECTING THE COOKING MODEAfter selecting one of the cooking modes, the default temperature for that cooking mode is displayed. The oven cavity

– 14 –USING STEAM MODE 1. If the screen is blank (sleep mode), turn on the oven by pressing the ON/OFF Button. 2. Press the Steam Button to select

– 15 –TEMPERATURE PROBEThe probe temperature defi nes the fi nal temperature of the product for any cooking phase. The oven cooking cycle stops when the

– 16 –Setting the Cooking Core Probe Temperature 1. Insert the pointed end of the core probe into the product so that the tip is approximately in the

– 17 –WRITING A COOKING PHASEIt is possible to link up to 10 cooking phases without using the program function. 1. Select the cooking mode by pressin

– 18 –WRITING A COOKING PROGRAMIt is possible to write and store up to 100 cooking programs with a maximum of 10 phases each.NOTE: The oven is also eq

– 19 –MODIFYING A COOKING PROGRAM 1. Press the Program Button to select program mode. The button will illuminate to indicate it has been selected. 2

– 2 –©HOBART, 2007TABLE OF CONTENTSGENERAL ...

– 20 –USING A COOKING PROGRAM 1. Press the Program Button to select program mode. The button will illuminate to indicate it has been selected. 2. Us

– 21 –DISPLAY SCREEN CLEANING AND SHUTDOWN ICONSSTOPStop Only Select this feature if the oven will be shutdown and not cleaned.Manual Clean Cycle Sele

– 22 –Automatic Clean CycleNOTE: Before using the auto clean cycle, make sure that the detergent pump tube is inserted correctly into the detergent co

– 23 –TROUBLESHOOTINGSERVICE AND PARTS INFORMATIONContact your local Hobart Service offi ce for any repairs or adjustments needed on this equipment.FAU

– 24 –FORM 35474 (July 2007) PRINTED IN U.S.A.SERVICE PARAMETER SETUPThe internal settings of the combi oven can be customized to fi t your own person

– 3 –INSTALLATION, OPERATION AND CARE OFELECTRIC COMBI, CONVECTION & STEAM OVENSSAVE THESE INSTRUCTIONSGENERALThe Electric Combi, Convection &

– 4 –LOCATIONAllow space for operating the oven. Do not obstruct the ventilation ports above the oven. To provide ventilation access, allow 1" cl

– 5 –DRAIN CONNECTION In order to avoid any back pressure in the oven, do not connect solidly to any drain.Extend the drain line from the 1" NPT

– 6 –Fig. 1OPERATION The oven and its parts are hot. Use care when operating, cleaning or servicing the oven. The cooking compartment contains live st

– 7 –Fig. 3UNLOADING THE OVENUnloading 6 or 10 Level OvensOpen door partially to allow hot air and steam to escape. Remove the product from the rack g

– 8 –CONTROL PANEL BUTTONSON/OFF Button Press this button to turn the oven on or off.Convection ModePress this button to set the oven to Convection Mo

– 9 –DISPLAY SCREEN ICONS44 EXAMPLEProgram Number (Name)This indicates the current program number, if used.PH 1/10Cooking PhaseThis indicates the