Hobart 5801 Instrukcja Użytkownika

FORM 16322 Rev. A (11-95)MODEL 5801 MEAT SAWMODEL5801 ML-38674EXECUTIVE OFFICES701 RIDGE AVENUETROY, OHIO 45374-0001NSTRUCTIONSI

–10–GAUGE PLATEWhen making several cuts of the same thickness (or when using the pusher plate), set the gauge plateas desired (Fig. 13) by pushing the

–11–CLEANING AND SANITIZINGWARNING: DISCONNECT ELECTRICAL POWER AND PLACE A TAG AT THE DISCONNECTSWITCH INDICATING THE CIRCUIT IS BEING WORKED ON BEFO

–12–MAINTENANCEWARNING: DISCONNECT ELECTRICAL POWER SUPPLY AND PLACE A TAG AT THEDISCONNECT SWITCH INDICATING THE CIRCUIT IS BEING WORKED ON.LUBRICATI

–2–Installation, Operation, and Care ofMODEL 5801 MEAT SAWSAVE THESE INSTRUCTIONSGENERALThe 5801 Meat Saw is rugged, durable, and easy to clean. The s

–3–PL-40847-1GAUGE PLATE HANDLEINSTALLATIONUNPACKING AND ASSEMBLYImmediately after unpacking the meat saw, check for possible shipping damage. If the

–4–UPPER PULLEY COVER (Plastic - Standard)The plastic upper pulley cover (Fig. 5) should be installed on the two hinge-retainers at the top andsecurel

–5–UPPER AND LOWER PULLEYSThe upper and lower pulleys are assembled on the upper and lower pulley shafts; the latch on eachpulley should be seated in

–6–PL-40838-1LOWER GUIDE HOLDERLOWER BLADE GUIDE ASSEMBLYCARRIAGEIn use, the carriage can roll back and forth between the left carriage stop (Fig. 9)

–7–REMOVING THE BLADERemove the upper and lower pulley covers. Raise the gauge plate to its vertical position. Removethe right table by lifting its

–8–ELECTRICAL CONNECTIONSWARNING: ELECTRICAL AND GROUNDING CONNECTIONS MUST COMPLY WITH THEAPPLICABLE PORTIONS OF THE NATIONAL ELECTRICAL CODE AND/OR

–9–OPERATIONSAFETY DEVICES INCORPORATED IN THIS SAW MUST BE IN THEIR CORRECT OPERATINGPOSITIONS ANYTIME THE SAW IS IN USE.SAFETY FEATURESUpper Guide a